Return to Shaver HD-8 Tractor Post Driver, Manual Tilt, 3 point Hitch Category 1
Sort By::
Page of 1


  0 of 0 people found the following review helpful:
 
5 of 5 June 8, 2022
Reviewer: Irvin Lange from Clinton, IA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Review May 25, 2022
Reviewer: Scott Kelly from Browerville , MN United States  
Your sales people are always good. Wish they would have told me about the drain line fir the unit just so I had a heads up. I have not used the unit yet but will in the next two weeks. Assembly was pretty simple. I think you need to put Kevlar wrap on the high pressure hoses before shipping. You should not have high pressure lines next to a operator with out burst protection. Other then that it looks good

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Shaver HD 8 May 19, 2022
Reviewer: William Dunn from Mechanicville, NY United States  
The unit so far works good. The shipping needs to be thought out. Boxes where all ripped open the unit was only held on with one strap and the paint is rubbed of in many locations!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice! March 2, 2021
Reviewer: Daniel Meeks from Middleburg, FL United States  
Shipping and assembly was pretty easy. The driver works great, I’m driving 4x4x6 and 6x6x8. The only issue was the return line must go to the hydraulic reservoir so for my tractor I had to have a machine shop custom make the fitting.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 4, 2021
Reviewer: Mark Slaba from Arcadia, FL United States  
this is a great time saver works great! Have driven 6" x 8' posts with no problems.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 Review October 29, 2019
Reviewer: Kent Cuthbertson from Farnham, VA United States  
My HD-8 did not come with a rubber splinter guard shield and I called regarding this matter when it arrived. I was told one would be provided and it never was. The unit was rusted in several places from sitting in the yard on a pallet and the plastic covering was torn. Otherwise, the unit works great now that I have it in operation.  EA Response:  We will follow up with this customer and make sure the issue is taken care of.  UPDATE  10-29-19:  According to the manufacturer, the design was changed in early 2018 and the rubber guard is no longer featured or offered on the drivers.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 hd-8 September 9, 2019
Reviewer: Steve from Wisconsin Rapids, WI United States  
showed up on 2 pallets boxes crushed had to look for some parts.  EA Response:  If parts are ever missing in a shipment, just give us a call and we will send what is missing to you ASAP.

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
2 of 5 Fair January 18, 2016
Reviewer: Chuck Baumert from Norfolk, NE United States  
Machine arrived in good time and all the advertised pieces were there.  The packaging left much to be desired.  There was only one band on the pallet allowing the pieces to clash together and knock a lot of paint off of the metal pieces, the pallet was broken up also.  Certainly doesn't look new and hasn't even been assembled yet.  The two boxes containing loose parts were smashed although it doesn't seem like anything was actually damaged.  Machine was received through my place of employment and the supply people signed for it but didn't note the damage.  I was not there at the time.  I am hopeful that when I assemble it there are no problems.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Amazing May 7, 2015
Reviewer: David K from brenham, TX United States  
Amazing  so much better than posting

Was this review helpful to you?