|
|
|
|
|
Double bottom 14" turning plow |
October 17, 2020 |
Reviewer:
Bruce Lipe from Alexander, AR United States
|
|
Upon getting the plow, A coulter was missing. Called and one was shipped right out.
A Cat 2 to Cat 1 top link bushing works better as coulter bushings. 2 bushings are required for each. Remove ~ 1/4" of material from the length of one bushing. Use a fat O ring, at each side of the spindle as a dust shield.
Plow mounted on the tractor, Kubota MX 5800, and initially adjusted. Plowed ~ 3/4 acre of old garden area. The plow works great!
Adjusted and plowed ~ 2 acres of never plowed ground, very impressed. Excellent dirt rollover, coulters work very well. No dirt in the hub.
When using a larger tractor try a longer top link. The OEM link is a bit too short for the plow.
The construction of the plow is very good. The bolt together design makes it simpler to repair if needed.
Still need to adjust a bit, but first impression is you folks build a product that will last for many years to come. A few glitches at first, were not considered significant.
Keep up the good work.
Was this review helpful to you?
|
|
|
|
|
|